RBSports Ce.6 MORI Montage-, Bedienungsund Trainingsanleitung Seite 23

ASSEMBLY
6. Assembling the swing arms on the swing rods
1. Align the swing arms (14) on the swing rods (23) in such a manner that
they are positioned in a straight line. (Please note: The handlebars can
only be aligned after the assembly has been completed in such a manner
that the handlebars are directed outwards – i.e. away from the handlebar
column (16).
2. Fasten the two swing arms (14) using screws (100), washers (102),
and nuts (101). Ensure that you tighten the screws firmly.
7. Assembling the pedals
1. Place the pedals(48) on the pedal rod (69). Align the holes in the parts
in such a way that they lie above each other.
2. Place a washer (106) and spring washer (105) on each screw (103) and
screw the pedals to the pedal rod. Fasten the pedal knob (104) to fix
the pedals.
3. Please note: The right pedal and the left pedal can be distinguished by
means of the outer edging of the pedals. The outer edge of the pedals
points towards the main frame.
(5)
(100)Carrage
(101)Acorn Nut
(102)CurvedWasher
bolt M8*35L(4)
for M8 Bolt (4)
8* 9*2T (4)
(6)
GB
(103)Carrage bolt
M6*P1.0*50L(4)
(105)Flat
Washer 6(4)
(106)Spring
Washer 6(2)
(104)Knob (foot
pedal)M6*P1.0 (4)
Ce.6 MORI 23