Maintenance; Technical Specifications - Antari S-100X Bedienungsanleitung

Maintenance

1. Do not allow the snow liquid to become contaminated. Always replace the caps on the
liquid container and the snow machine liquid tank immediately after filling.
2. Before storing away after each operation, rinse the system with pure water and let it pump
for at least 1or 2 minutes. This step helps to ensure a longer life span of the motor and the
nozzle.
3. It is strongly recommended to regularly clean
holes (on both sides of the machine). Simply use a small brush, a toothbrush for example,
and gently brush in the direction from top to bottom. This step helps to ensure that minimal
debris will get into the machine or causes clogging.
Snow Liquid
Depending on the desired effect, use either ANTARI SL-5 Snow/Foam Liquid for normal snow
or ANTARI SL-5A Snow Liquid for fast-dissipating snow.

Technical Specifications

MODEL
Power Supply
Motor
Output Volume
Tank Capacity
Fluid Consumption Rate
Weight
Dimensions (LxWxH)
Remote Included
10 Meter Remote Extension
DMX
Warm-up Time
the dust/residue
S-100X & S-200X
100/120V AC, 230/240V AC, 50/60Hz
770W (min. output), 1000W
5.5 min/liter
L505 W276 H280 mm
Save these instructions.
9
around the machines' vent
(max. output)
180ml/min
5 liters
(100% output)
11 kg
SC-2
EXT-6
On-board
N/A