Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• MOUNTING THE WALL BRACKET (E)
Choose a sheltered spot on a wall near an electric plug socket. Mark out where the
o
holes are going to go, drill the holes and attach the wall mount with the screws sup-
plied. The two nozzles (F1-F3) can fit on the wall mounting, too.
• BEFORE STARTING THE VACUUM CLEANER
The battery cells in new appliances are not charged yet. That is why you must charge
o
up the vacuum cleaner for about 10 hours before its first use. After which, the appli-
ance will have reached its full capacity.
To make sure that the vacuum cleaner is ready for use at all times, you can charge it
o
again immediately after using it.
Caution: To avoid reducing the operating time of the appliance, we recommend
that you discharge the appliance completely from time to time, after which the
battery must be charged again for 10 hours.
• CHARGING THE APPLIANCE
Put the vacuum cleaner in the charging station (E). This automatically connects it to
o
the power supply.
Connect the charger plug to a 230 V socket. When the red charging light (C) lights up,
o
it means that the appliance is being charged.
Whilst it is charging, the charger plug may become warm, this is completely normal.
o
It is not possible to overcharge the battery.
• DRY VACUUMING
Turn the appliance on (D) and clean the surface or object. To remove dust from crev-
o
ices, skirting boards, corners, drawers, etc., you can use the rigid crevice tool (F3).
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
23
Werbung
Inhaltsverzeichnis
