en
�� | KTS ��� | Product description
3.
Product description
�.1
Application
!
The KTS 200 may not be opened. Opening the KTS 200
erases its licensing data. It is then no longer possible
to perform control unit diagnosis.
The KTS 200 is a system tester for control unit diagnosis
in vehicle workshops. The KTS 200 features licensed
control unit diagnosis software and has the following
functions:
R
Error memory reading
R
Actual value display
R
Actuator initiation
R
Use of control unit specific functions
!
The KTS 200 is a precision device and must not be
exposed to the effects of heat (e.g. direct sunlight),
impacts or vibration, magnetic fields or excessive
levels of dirt.
�.�
Requirements
To license the KTS 200 with the ESI[tronic] Startcenter-
software and perform the software update for KTS 200
control unit diagnostics, a PC/laptop with the operating
system WIN XP (SP2), WIN Vista
WIN Vista
Business and at least one free USB port is
TM
required.
The USB interface must support the USB 2.0 or USB 1.1
protocol.
i
The control unit diagnosis software on the KTS 200
must be activated using the ESI[tronic] software
license key.
|
1 689 989 001
2009-06-15
Home Premium or
TM
�.�
Delivery specification
Description
KTS 200
Power pack
Power supply lead (not with 0 684 400 213)
USB connecting lead, 1 m
OBD diagnostic lead, 1.5 m
DVD ESI[tronic] Startcenter
Case
Connecting lead for
cigarette lighter socket (12 V)
Important information and safety instructions 1 689 979 922
KTS 200 operating instructions
Set of leads
<)
Set of leads
<)
Wall bracket
<)
In some cases, special accessory only
<)
!
Always store the KTS 200 and accessories in the
case when not in use.
�.4
Special accessories
Information on special accessories, such as vehicle-
specific connecting leads, can be obtained from your
authorized Bosch dealer.
Order number
1 687 022 889
1 684 461 106
1 684 465 491
1 684 465 555
1 987 P12 005
1 685 438 019
1 684 465 584
1 689 989 001
1 687 001 855
1 687 001 875
1 681 320 082
Robert Bosch GmbH