Controls And Ports - TrekStor I.GEAR SSD-STICK PRIME Bedienungsanleitung

6. Content
TREKSTOR I.GEAR SSD-STICK PRIME
■
USB A-A extension cable
■
Quick Guide
■
7.

Controls and ports

A) Protective cap
B) USB connector
C) LED
8. Connect the SSD stick to the computer
The SSD stick can be connected to the computer directly or using the USB A-A
extension cable included. The extension cable is used if the SSD stick cannot be
connected to the computer directly for space reasons.
a) Remove the protective cap from the SSD stick.
b) Optional: Connect the SSD stick to the complementary end of the
extension cable.
c) Connect the SSD stick or the extension cable to a compatible USB port on
your computer.
The LED lights up, the SSD stick is recognised by your computer and displayed in
disk management.
ADVICE
i
Use the function "Safely Remove Hardware" in order to remove the SSD stick
from the computer in a proper fashion.
A B C
13