Setting Angle Of Intersection; Fix Sliding Table; Application Notes Cutting Boards - Holzmann TS 315F-1500 Original Bedienungsanleitung

5.2.4

Setting angle of intersection

To the saw blade 90 by the tilt ° - 45 ° to adjust, which is Winkelhandrad at the front of the ma-
chine
 The set angle can be read from the graduated scale at the wheel for height adjustment.
 With the locking lever of the set angle is fixed.
5.2.5

Fix sliding table

Dragging and 90 ° rotation of the fixing pin you can attach
the sliding table in position.
5.3 application Notes
5.3.1 Cutting boards
When performing this operation, the following
equipment shall be used for safe working:
 The table extension
 the miter fence with support for the workpiece
 the guard of the saw blade
 the riving knife
 the hold-down
 the insert in the table
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Stroke angle
Adjustable 0°
(45° left side)
Fixing lever
OPREATION
Formatkreissäge / panel saw TS 315F-1500
Seite 37