Initialize The Rollei Egimbal G4; Technical Specifications - Rollei eGimbal G4 Bedienungsanleitung

Initialize the Rollei eGimbal G4

7
Initialization Instructions
1 . Install the camera properly .
2 . Put the Gimbal on a stationary flat surface and keep motionless .
3 . Start the Gimbal .
4 . The Gimbal is activated and it will be initialized automatically . Afterwards pick
up the Gimbal and start working with it .
Rollei eGimbal G4 needs to be initialized whenever the following
situations appear after power on
1 . After power on, the angle of pitch is not level with the horizon line .
2 . After power on, the angle of roll is not parallel with the horizon line .
3 . When the Gimbal is in heading lock, the angle of heading moves frequently
(heading is not stationary) .

Technical Specifications

8
Operating Voltage
Pitch Angle
Roll Angle
Vertical Heading Angle (direction)
Horizont . Heading Angle (direction) Min . –50°
Vertical Change of Position
Horizontal Change of Position
Static Mode
Motion Mode
Overvoltage Protection
Size
Weight
Min . 0,6 V Max . 17,0 V
Min . –160° Max . +160°
Min . –50° Max . +50°
Min . –160° Max . +160°
Max . +50°
Min . 2°/Sek . Max . 75°/Sek .
Min . 3°/Sek . Max . 150°/Sek .
Min . 0 .01 Max . 0 .05
Min . 0 .1 Max . 0 .5
800 mA
33 .9 x 7 .5 x 6 .5 cm
265 g (net)
Motionless Flat Surface
Standard 8 .6 V
Standard 0°
Standard 0°
Standard 0 .02
Standard 0 .2
15