Mounting Instructions - Sony DK110NLR5 Bedienungsanleitung

2. Mounting Instructions

. Be sure to chuck the stem for mounting the measuring unit.
Make sure that the set screw are out of contact with the measuring unit as mounted.
. Fix the cable in a suitable position to prevent possible cable breakage. Never handle the
cable by forcibly pulling or bending it. (Inside bend radius 50 mm or more)
. Except when using a flat feeler, it is recommended to either attach the spring washer
(nominal size: 2.5) or use a screw lock to prevent loosening of the feeler.
. Since mounting parallelism affects the measuring accuracy, adjust the parallelism to within
0.3 mm in relation to 100 mm displacement by means of mount bracket (or sleeve).
. After the stem is secured, do not apply force in the rotational direction. This could cause
a failure.
2
(E)
DK110NLR5