Installing The Driver And Software; For Customers In Europe - Sony PCGA-BA1 Serie Bedienungsanleitung

Installing the driver and software

Install the driver and software required to use this device.
Note
Before starting the procedure below, the computer must be set up to read CD-ROM discs.
Do not remove the CD-ROM until all steps have been completed. For details on
CD-ROM use, refer to the manuals provided with your computer and CD-ROM drive.

For customers in Europe

Installing the Bluetooth Driver and Software
1
Turn on the computer and insert the supplied CD-ROM into
the CD-ROM drive.
The installer program starts automatically.
z
Hint
If the installer program does not start automatically, click "Start", and select "My
Computer". Double-click the drive letter (for example, drive E) corresponding to the
CD-ROM drive, the double-click "Setup.exe".
* The drive name may be vary, depending on the computer.
2
Select your language.
3
Click "Install BlueSpace NE version 3.1" button.
4
Follow the instructions on the screen, clicking "Next" and
"Finish".
Installing Network Smart Capture
1
Turn on the computer and insert the supplied CD-ROM into
the CD-ROM drive.
The installer program starts automatically.
Continued on next page
GB
5