Scan Sensitivity Setting - Fm - PERFECTPRO UBOX-500R Bedienungsanleitung

Scan sensitivity setting – FM
Your radio includes "Strong stations only" and "All stations" options for the auto-scan function.
By setting the radio to the "Strong stations only" scan option, weaker signals from more distant
transmitters can be ignored by the radio, making stronger signals easier to find.
1
Press the Power On / Off button to switch on your radio.
2
If needed, press and release the Source button until the FM band is selected.
3
Press the Menu button to access FM menu. Rotate the
Tuning control knob until "FM scan setting" shows on the
display. Press and release the Tuning control knob to
enter the scan sensitivity adjustment mode. The current
setting will be marked with an asterisk.
4
Rotate the Tuning control knob to switch between "Strong
stations only" and "All stations" options on the lower line
of the display. The "All stations" option will allow the radio
to find weaker signals when scanning.
Press and release the Tuning control knob to confirm your selection. The setting is stored in
5
the radio and remains in force until changed or until a System Reset.
FM
<FM scan setting >
FM scan setting *
<All stations
FM scan setting
<Strong stations only >
>
21