Maintenance & Storage - Makita BLM430 Bedienungsanleitung

inside of the main unit.
Emptying the grass basket
WARNING:
To reduce a risk of accident, regularly check the
•
grass basket for any damage or weakened
strength and replace it if necessary.
1. Release the switch lever.
2. Remove the lock key.
1. Rear guard
2. Grass basket
012307
3. Open the rear guard and take out the grass
basket with its handle.
4. Empty the grass basket.
MAINTENANCE & STORAGE
WARNING:
Always be sure that the lock key and battery
•
cartridge are removed from the mower before
storage or attempting to perform inspection or
maintenance.
Wear gloves when performing inspection or
•
maintenance.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
MAINTENANCE
1. REMOVE THE LOCK KEY. Store it in a safe place
out of the reach of children.
2. Clean your mower using only mild soap and a
damp cloth. Do not spray or pour water on your
mower when cleaning.
3. Turn mower on its side and clean grass clippings
that have accumulated on the underside of mower
deck.
4. Check all nuts, bolts, knobs, screws, fasteners etc.
for tightness.
1
5. Inspect moving parts for damage, breakage, and
wear. Have repairs made on any damaged or
missing parts.
6. Before storing the mower, remove the battery
cartridge from it.
7. Store mower indoors in a cool, dry and locked
place. Don't store the mower and charger in
locations where the temperature may reach or
exceed 40 ﾟ C (l04 ﾟ F).
Storage
Fig.14
WARNING:
When carrying or storing the mower, do not hold
•
the folded handles but the front grip of the mower.
Holding the folded handles may cause a serious
injury or damage to the mower.
Fig.15
The mower can be stored in upright position.
2
1. Clamping screw
2. Expand
3. Move down forward
4. Clamping nut
5. Pivot back
012298
1. Loosen the clamping screw, expand the lower
handle to both sides and then move down the
handle forward.
NOTE:
At this time, keep a firm grip on the lower handle so
•
that it does not fall down to the far side from the
tool.
2. Loosen the clamping nut and pivot the upper
handle back.
12
3
2
5
4
1