Adjustment Of Pedal Position - Dürkopp Adler 887 Betriebsanleitung

4.3

Adjustment of pedal position

2
1
12
–
For ergonomic reasons align the pedal (1) as follows:
The center of the pedal must be approximately under the needle.
There are slots in the cross strut frame (3) to help align pedal.
–
Adjust the draw rod (2) so that the foot axis is perpendicular to the
pedal surface.
Caution! Risk of injury!
Failure to keep the determined pedal position can cause damage to
the operator's locomotion system.
3
2