Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning; Disposal - Parkside PBSG 95 C2 Originalbetriebsanleitung

Bohrerschärfgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Unscrew the 4 screws
and remove the cover
2
Remove the brick
Loosen the screw connection
the brick
in the brick holder
5
27 mm open-end spanner (not included) or
a nut driver (see Fig. B).
Note: Turn counter-clockwise to open!
Remove the metal ring
Secure the new brick in the brick holder
with the flattened edge down and reinstall
the metal ring
.
6
Tighten the screw connection with a 27 mm
open-end spanner.
Note: Turn clockwise to close!
Be sure the spring
product as shown in Fig. D and insert the
brick into the product. Turn the brick until it
is again precisely fitted as shown in Fig. A
or the brick cover
Reattach the brick cover
place with the 4 screws

Maintenance and Cleaning

This product is maintenance-free except for
replacing the bricks.
ELECTRIC SHOCK! Unplug the
mains plug from the socket prior
to performing maintenance or repairs.
Clean the product regularly, preferably
immediately after every use.
Use a dry cloth to clean the housing. Never
use petrol, solvents or cleaning agents that
attack plastic.
on the brick cover
3
(see Fig. A).
2
.
5
keeping
7
with a
8
.
6
is installed in the
9
will not fit.
2
and fasten in
2
.
3
RISK OF
open the product except to replace the
brick. Always have repairs or parts replace-
ments performed at the service centre or by
an electrician. If the input lead on this prod-
uct is damaged, it must be replaced with a
specially prepared power cord at the
service centre.
8

Disposal

The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
The Green Dot is not valid for
Germany.
Observe the marking of the
packaging materials for waste sepa-
b
a
ration, which are marked with abbre-
viations (a) and numbers (b) with
following meaning: 1–7: plastics /
20–22: paper and fibreboard /
80–98: composite materials.
The product and packaging materi-
als are recyclable, dispose of it sepa-
rately for better waste treatment. The
Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful
life and not in the household waste.
Information on collection points and
RISK OF INJURY! Never
GB/IE
19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis