Design Of The Spray Gun; Intended Use; General Safety Instructions - SATA SATAminijet 1000 K Bedienungsanleitung

Operating instructions SATAminijet 1000 K/H RP/HVLP
4.

Design of the Spray Gun [1]

[1-1] Spray gun handle
[1-2] Trigger
[1-3] Material connection
[1-4] Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
[1-5] Round/flat spray control
[1-6] Material flow control screw
5.

Intended Use

The spray gun has been designed for the application of paints, lacquers
and other sprayable media by means of compressed air on suitable sub-
strates and surfaces.
6. Safety Instructions

6.1. General Safety Instructions

• Before using the spray gun, please read all safety and the operating
instructions carefully. Safety instructions and indicated safety meas-
ures are mandatory.
• Please keep all enclosed documents and make sure that the spray
gun is handed over only together with these documents.
[1-7] Material flow control counter
[1-8] Air micrometer
[1-9] Air micrometer (air flow con-
[1-10] Air piston (not visible)
[1-11] Compressed air connection
[1-12] ColorCode-System (CCS)
Warning! Attention!
nut
trol) locking screw
EN
111