HumanTechnik DS-1 Bedienungsanleitung Seite 10

Both alarm times can be activated
separately. Press
2/Stop 24 h simultaneously and
push the snooze button. With every
push of the snooze button one of the
three possible settings is shown on
the display.
You can choose between the follo-
wing settings:
Alarm time 1 active:
Display indication: AL 1
Alarm time 2 active:
Display indication: AL - 2
Alarm time 1 and 2 active:
Display indication:
AL 1 2
In addition to the display indication
the LED flashes as follows:
Alarm time 1 aktiv:
LED on
LED off
Weckalarm 2 aktiv:
LED on
LED off
10 English
1 and
Alarm time 1 and alarm time 2
active:
LED flashes continuously
Switching the alarm on/off
Activate/deactivate the alarm with
the alarm on/off switch at the back
of the DS-1.
If the switch is in the OFF-position,
both alarm times are deactivated.
Setting of the audio frequency
The audio frequency of the alarm
signal can be adjusted with the
audio frequency control on the left
side of the alarm clock. The audio
frequency increases if the control is
turned to the left and decreases if
the control is turned to the right.
Note:
The alarm tone is turned off if the
audio frequency control is turned
completely to the left.
Setting of the volume
The volume of the alarm signal can
be changed with the volume control
on the right side of the alarm clock.
The volume decreases if the control
is turned to the left, the volume
increases if the control is turned to
the right.