Installing The Hood Onto The Wall - Beko HCA63640B Bedienungsanleitung

3
Installing your appliance
Information required for the preparation of
the installation place for your hood is given
below.
3.2 Installing the hood onto
the wall
To install the hood onto the wall, loosen the
screws of hanger plates on the motor housing and
pull the plates upwards. Then, tighten the screws
of the hanger plates. (Figure 3a).
(Figure 3a)
External flue connection plate
(Figure 3b)
Hood / User Manual
If you will use Ø 120 mm flue pipe, install Ø 120
mm flue adapter onto it.
Hanger plate
25 / EN