TERMA MEG Gebrauchsanweisung Seite 12

Intended use of device
The heating element is an electric device
intended solely for installation in radiators
(standalone or connected to the central
heating system) to serve as space heaters,
or clothes and towels dryer.
Technical information
Type of electrical connection:
Heat outputs available:
Towel rail connection thread:
Casing protection class [IP]:
Length of heating element:
* Device intended to be connected permanently to the system
12
User manual MEG, DRY, MOA, REG 2, REG 3 www.termaheat.pl
Model markings
(power cable type):
Power supply:
Insulation class:
Heating element power output should be
matched with radiator output for parame-
ters of 75/65/20° C
PB (Straight cable without plug) *
PW (Straight cable with plug)
SW (Spiral cable with plug)
Y: MEG, MOA, REG 3, DRY
Z: REG 2
120, 200, 300, 400, 600, 800, 1000 [W]
230 V / 50 Hz
Class I
G 1/2"
IPx4: MEG
IPx5: REG 2, REG 3, MOA, DRY
120 200 300 400 600 800 1000 1200 [W]
315 275 300 335 365 475 565 660 [mm]