3
Fasten the handle to the top with 2 screws and
locknuts. Tighten the screws with the spanner.
4
Upper-
part
Lower-
part
5
1
2
3
Fasten the resistor carriers to
the lower part and the upper
part with screws and locknuts.
The carriers with the chip tray
carriers (1 and 2) are fastened
to the lower part. One carrier
(3) is fastened to the upper
part.
Fasten the lock handle to the grill with 3 screws and
locknuts. Tighten the screws with the spanner.