Assembly instruction
To assemble the Grill-Smoking Oven, you need an even base that will not scratch the Grill-
Smoking Oven, a cross-head screwdriver and a 10 mm adjustable spanner.
1
Place the Grill-Smoking Oven on an even base. Fasten the legs
to the smoking oven with 8 screws and locknuts. The locknuts
must be on the inside. Tighten the screws with the spanner.
2
Fasten the chain to the holes in the side of the Grill-Smoking
Oven between the upper and the lower part. Adjust the nut in
the chain so that the chain can move freely, and fasten the chain
from the inside of the Grill-Smoking Oven with a flange nut in
the upper and lower part. Tighten the screws with the spanner.