Wiring Connection - Kenwood KDC-4554U Bedienungsanleitung

Wiring connection

For
R L
Rear/subwoofer output terminals
Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control wire/ Antenna
control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO connectors
Pin Color and function
A4 Yellow Battery
A5 Blue/White Power control
A7 Red Ignition (ACC)
A8 Black Earth (ground) connection
20
:
Antenna terminal (JASO)
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control adapter
REMOTE CONT
ANT CONT
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
P. CONT
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
MUTE
system, consult your navigation manual.)
Pin
B1 / B2
B3 / B4
B5 / B6
B7 / B8
R L
Front output terminals
Rear/subwoofer output terminals
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Ignition wire
(Red)
Unit
Battery wire
(Yellow)
Color and function
ª
Purple / Purple/black
ª
Gray / Gray/black
White ª / White/black
Green ª / Green/black
Fuse (10 A)
A7 (Red)
A4 (Yellow)
Default wiring
·
Rear speaker (right)
·
Front speaker (right)
· Front speaker (left)
· Rear speaker (left)
Vehicle