Herunterladen Inhalt Inhalt Diese Seite drucken

Cookware Detection; Heat-Up Function - Teka VT TC 2P.1 Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 82

Cookware detection

(Induction elements)
The induction cooking zones have an
incorporated cookware detector. The
power indicator will show the symbol
meaning that "there is no cookware" if no
cookware is detected when the zone is on
or if the cookware is inadequate.
If the cookware is taken off of the cooking
zone while the zone is functioning, the
induction element will automatically stop
supplying energy and the
cookware" symbol will go on.
When the cookware is once again placed
on the cooking zone, energy will once
again be supplied at the power level that
was chosen.
The cookware detection time is 10 minu-
tes. If no cookware is placed on the zone
during this time, or if the cookware is
inadequate, the cooking zone will deacti-
vate. The power indicator will show the
symbol "there is no cookware" or
After use, disconnect the cooking
zone by using the touch control.
Otherwise, an undesired operation
could occur in the cooking zone if a
piece of cookware is accidentally pla-
ced on the cooking zone during the
following 10 minutes. Avoid possible
accidents!

Heat-up function

(Automatic start of cooking)
This function will help you when cooking,
since it is not necessary to be there at the
same time. The touch control panel pre-
programmes the chosen hotplate to the
maximum power level and then lowers it to
the desired power level, chosen by you,
after a certain amount of time. (See table 3)
Table 3
Power
selected
1
2
3
4
5
6
7
"there is no
8
9
10
11
12
ACTIVATING THE HEAT-UP FUNCTION
1 Adjust the cooking level to
2 Immediately afterward, activate the func-
0
tion by pressing sensor buttons
.
and
A and the number 12 will then blink alter-
nately (
been placed on the heating element).
3 Immediately afterward, use the minus
key to choose a lower level, between
11
and
, to continue cooking.
The function will work as programmed.
After a certain amount of time (see table),
cooking will continue at the final power
level chosen.
If 10 seconds have passed after carrying
out step 2 and a level lower than
been chosen, the automatic boost function
will disconnect.
HEAT-UP COOKING
FEATURE
(Time in seconds)
40
48
64
96
120
176
240
320
432
120
192
---
0
.
(4) at the same time. The letter
A
and
if no cookware has
12
GB
(5)
1
has not
73

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tr 3220Vi tc 30 2iVt cm 30 2p

Inhaltsverzeichnis