INNOCIGS ESPION SILK – SELECTION & OPERATING OF THE MENUS
Note:
1. This function should only be used at room temperature, to ensure that the correct "base resistance" is locked.
2. If you accidentally use a conventional coil or coils with a resistance greater than 1.5 ohms in TC-Ni, TC-Ti, TC-SS or
TCR (M1, M2, M3) modes, the device will automatically switch to VW Mode.
Setting of the TCR-Value (TCR Mode only)
In the TCR menu you can specify the TCR-Values for the memory locations M1, M2 or M3. The TCR value
range is between 1 and 999.
66