buster LX 2011 Handbuch Seite 164

”
Fiskars Boats, Inha Works Ltd 2009
General requirements
Basic information
2.1 Hull markings
2.2 Manufacturer's plate
2.5 Owner's Handbook
Arrangements and equipment
2.3 Prevention of falling overboard
3.7 Stowing life raft
3.8 Emergency exit
3.9 Anchoring and towing
5.7 Navigation lights
5.8 Prevention of emissions
Installations
5.1 Engines and engine space
5.2 Fuel system
5.3 Electrical system
5.4 Steering system
5.5 Gas equipment
5.6 Fire prevention
Dimensions
3.1 Structure
Hydrostatics
3.2 Stability and freeboard
3.3 Buoyancy
3.6 Maximum permitted load
3.4 Hull and deck openings
3.5 Filling with water
Drive characteristics
4 Drive characteristics
2.4 Visibility from steering position
- = is not relevant for the security of the particular boat model, or the system in question is not used in the boat.
EN ISO 8666:2002
ISO 10087:1996 / A1:2000
RCD annex I, 2.2
EN ISO 10240:2004
EN ISO 15085:2003
-
-
EN ISO 15084:2003
1972 COLREG
-
-
EN ISO 10088:2001, EN ISO 11105:1997
EN ISO 10133:2000, ISO 8846:1990
EN ISO 28848 + A1:2000
-
EN ISO 9094-1:2003,
RSG Guidelines, NBS-VTT Extended rule
EN ISO 12217:2002, EN ISO 12217-3:2002/DAM 1
EN ISO 12217:2002
EN ISO 12217:2002, EN ISO 14946:2001
-
EN ISO 15083:2003, ISO 8849
EN ISO 11592:2001
RSG Guidelines, EN ISO 11591
31 (31)