Safety- And Maintenance- References; Installation Places - Marmitek SD10 Betriebsanleitung

The SD10 smoke detector does not sense gas, heat or smokeless flames!
The equipment may not be modified under any circumstances.

3 SAFETY- AND MAINTENANCE- REFERENCES

• Never open the equipment. No serviceable parts are inside. In the event of an error please
contact your dealer.
• Only operate the equipment indoors and avoid the contact with dust, strong drafts of air
and direct sunlight.
• Clean the equipment with a dry linen cloth, this cloth can be easily dampened.
• Never use any kind of cleaning products.
• The system must not be kept/operated within the reach of children. It is not a toy!
• Batteries are to be handled as disposable chemicals.

4 INSTALLATION PLACES

It is advisable to install several smoke detectors in your home.
At least one smoke detector should be installed on each floor.
This ensures that an effective warning is possible when a fire starts.
One smoke detector must be installed in the area outside the bedroom which is used as the exit
(corridor and/or staircase).
Also ensure that you install the smoke detector at a location where it can be easily heard, even
through the closed door of the bedroom! (Otherwise you will not wake up during a fire alarm!)
Recommended best and acceptable locations to mount smoke detectors (figure A):
The smoke detector should be installed on the ceiling in the centre of the room. Smoke rises
and gathers in this area (figure B) and placing the smoke alarm here guarantees the earliest
possible alarm warning. For sloping roofs, the smoke alarm should be installed about 1 meter
from the highest point, as displayed in figure C.
Smoke detectors can be installed in all rooms, but not in the bathroom or directly above the
cooking area in the kitchen.
4 MARMITEK