Mains Supply 230 V; Alarm; Settings - Truma CP 25-K Gebrauchsanweisung, Einbauanweisung

Mains supply 230 V~

If mains supply is detected, the display shows the symbol (7d).
7d
Mains supply 230 V ~ and driving mode
If the mains cable is connected and the motor is running, the
symbol (7c) is also displayed. An acoustic signal is emitted to
indicate that the mains cable is connected.
7c 7d
The acoustic signal will switch off after 30 seconds.
If the mains cable is disconnected within this time, the signal
is switched off and the symbol (7d) disappears from the
display.
If the motors is switched off within this time, the signal is
switched off and the symbol (7c) disappears from the display.
7d = Mains supply 230 V ~,
mains cable connected
7c = Parallel circuit
(battery I / battery II)
in driving mode
7d = Mains supply 230 V ~

Alarm

When the set alarm time is reached, an alarm signal is emit-
ted. The alarm signal stops automatically after a minute.
Pressing the button stops the alarm signal.
When the alarm is activated, an alarm signal will sound every
day at the set time.

Settings

Press the key . The display shows the settings menu.
a b c
d e f g
Use the navigation keys to select the required setting and
confirm with . A corresponding submenu is displayed.
With the key combination
or press the function keys 1 – 4.
Active functions are shown in inverse.
The selected element is marked with an additional frame.
a = Time
b = Alarm
c = Key tone
d = Brightness and
background colour
e = Temperature
comparison of the
IN and OUT display
f = Consumer circuits
g = Return
– return to the starting screen
23