Fermax DUOX Video Skyline Installationshandbuch Seite 37

RESTORE DEFAULT VALUES: Reset
The DUOX amplifi er has a 'Reset' function which can be used to
restore programmed default parameters.
RESET Mapping (call button code)
1.- Reset amplifi er: remove power.
2.- With the SW1 button pressed, power and maintain the SW1
button for 5 seconds. The LED will blink quickly to indicate that
button mapping has been restored.
Lock Release Times
To change the open door times see ANNEX: Voice assisted
confi guration in button panels. Instructions included with this
equipment.
You can also set it by temporarily connecting a keypad (ref. 7439),
(download the Direct Video Duox Panel Programming Manual, cod.
970052, at www.fermax.com).
RESET to default parameter values (via keypad)
You can Reset the parameters to the factory default values. For
this you must temporarily connect a keypad (ref. 7439) to enter
the numeric values. Download the Duox Video Direct Panels
Programming Manual, cod. 970052 at www.fermax.com.
Pag 37