Confi guration - Programming the Amplifi er
The DUOX amplifi er can be confi gured to allow for the operation as
a general entrance, block entrance or sub-block entrance.
• The DUOX system uses 6 digit house terminal addresses.
• These call code digits are organised as follows: BBSSNN:
- BB: indicates the Block number, (from 00 to 99).
- SS: indicates the sub-Block number, (from 00 to 99).
- NN: indicates the sub-Block house number, (from 00 to 99).
You do not have to segregate the installation according to this
hierarchy since the system adapts to the installation´s needs.
IMPORTANT NOTE:
Confi guration of the parameters by the installer.
- To confi gure the Skyline push button panels see ANNEX: Voice assisted
confi guration in button panels. Instructions included with this equipment. You
can also confi gure it by temporarily connecting a keypad ref. 7439, download
the DIRECT Video Duox Panel Programming Manual, cod. 970052, at www.
fermax.com.
- In DIRECT Panel confi gurations (with keypad), to program these parameters, you
must download the manual from our website.
Pag 19