Safety And Compliance; Electromagnetic Fields (Emf); Display Icons - Philips Sleep & Wake-Up Light HF367 Serie Handbuch

General

Safety and compliance

Electromagnetic fields (EMF)

Display icons

Wake-up profile / Alarm
Settings
Wind-down program
Wi-Fi disabled
- The appliance has no on/off switch. To disconnect the appliance, remove
the plug from the wall socket. The adapter must remain easily accessible
at all times.
- This appliance is only intended for household use, including similar use
for instance in hotels.
- No naked flame sources, such as lighted candles, should be placed on
the appliance.
- If you often wake up too early or with a headache reduce the set light
intensity level and/or the set Sunrise Simulation time.
- If you often wake up by the alarm sound, increase the set light intensity
level or the set Sunrise Simulation time.
- If you share a bedroom with someone else, this person may
unintentionally wake up from the light of the appliance, even though this
person is further removed from the appliance. This phenomenon is the
result of differences in light sensitivity between people.
- The power consumption of the appliance is lowest if no device is
connected to the USB port and the lamp, radio, display and Wi-Fi are
turned off.
This appliance meets the safety requirements in the EU for:
- IEC 60598: Luminaires.
- IEC 62471: Photobiological safety of lamps and lamp systems.
- IEC 62368: Audio/video, information and communication technology
equipment.
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Light intensity and light on/off
Radio or your own music
Wi-Fi
Audio feedback
English
9