General Information - Bemer PRO SET Handbuch

General information

There is an important difference between the general and targeted
forms of application when using BEMER therapy. The general full
body application for day is carried out using the B.BODy according
to the basic plan with the intensities 1-10 (short application).
Application during the sleep phase is also carried out using the
B.BODy and with the corresponding special program.
The targeted applications are carried out using the application
modules B.SPOT and B.PAD and use, depending on the required
penetration depth, the predefined programs P1 through P3.
General tips
>> P lease note that several application modules can be
connected to the B.BOX.
Simultaneous operation when using the B.BOX Classic
is only possible with two B.BODy application modules
(using the same duration and intensity level).
magyar magyar
>> Short applications always last 8 minutes,
regardless of the chosen intensity.
>> Programs have different durations and
use varying intensities.
>> Ongoing applications can be canceled at any time
by pressing the power button [START / STOP].
>> Canceled applications can not be continued;
they must be restarted.
>> The plus Signal is switched on by default
and can be switched off if needed.
>> The Sleep Program does not support the plus Signal.
>> It is not recommended to use the Sleep Program
with the rechargeable battery.
français français english deutsch
eNGLIsh deutsch
101