Emergency Button; Radio Antenna; Information For Users - EdilKamin NANCY Installations-, Betriebs- Und Wartungsanleitung

Pellet reserve system
Before enabling the system, you need to load a sack of pellets into the tank and use the stove until the loaded
fuel has run out. This allows for a short system road test.
After this, the tank can be fi lled completely and the stove started up.
When running, at the time at which a whole 15 kg sack of pellets can be loaded, the display will show the word
"Reserve" fl ashing.
At this point, after having poured in a sack of pellets, you need to 'inform' the memory that you have loaded 15 kg.
To do so, proceed as follows:
1. press the "M" key (for approximately 3-4 seconds) until the word "Clock" appears.
2. press the "+" key until the word "Reserve" appears.
3. press the "M" key until the following screen appears,
Kg remaining in tank
then use the "+" key to take the fi gure (*) to the value equal to the Kg of pellets loaded (15 kg in the above example).
4. press the "M" key to confi rm
5. press the key
After having completed the above procedure, after having consumed the 15 kg, the wording "Reserve" will appear
fl ashing at intervals. After which the operation must be repeated, from point 1 to point 5.

EMERGENCY BUTTON

Should the remote control be broken, the basic functions can also be accessed by means of a red emergency button
located under the external hatch, on the left (see fi g. 7).
To press the button once or more to enable the function desired:
1. A STOVE OFF
by pressing the red button for 2 seconds this turns on.
2. A STOVE ON
by pressing the red button for 2 seconds this turns off.
3. A STOVE ON
manual mode, by pressing the red button, you go from P1 to P3.
4. A STOVE ON
automatic mode, by pressing the red button, you go from 5°C to 30°C.

RADIO ANTENNA

Stove dialogues with the remote control by means of radio waves. The radio signal is received by the radio control by means of a
small antenna beneath the external hatch (see fi g. 7).
In accordance with Art. 13 of the Legislative Decree No. 151, dated 25 July 2005, "Implementation of Directives: 2002/95/EC,
2002/96/EC and 2003/108/EC, pertaining to the reduction of hazardous substances used in electrical and electronic equipment,
as well as disposal of waste". The crossed-out wheeled bin symbol shown on the equipment or on the packaging indicates that
the product must be disposed of separately at the end of its useful life. Therefore, at the end of the equipment's useful life, the
user must hand in the equipment to suitable collection facilities for electrical and electronic waste, or return it to the retailer
when a new, equivalent appliance is purchased in a ratio of one to one.
INSTRUCTIONS FOR USE
to exit.

INFORMATION FOR USERS

fi g. 7
- 34
-
Kg caricati
emergency button