Data Hold Function; Tare Function - Etekcity EHS-18 Anleitung

Data Hold Function

Once the weight has stabilized and "Hold"
appears on screen, the weight will stay on the
screen for 60 seconds, or until you measure
another object or press TARE.
Turning the data hold function on or off:
1. When the scale is on, press and hold
for 3 seconds.
2. Press UNIT to alternate between turning
data hold function on or off.
Hoon - Data hold function on
HooF - Data hold function off
3. Press TARE to confirm selection.

Tare Function

The tare function allows users to weigh an
object inside a container by subtracting the
weight of the container from the total weight.
1. Hang the container on the weighing scale
hook and allow the weight to stabilize and
lock (the word "Hold" will appear).
TARE
2. Hold the scale stable and press
tare the current weight. The display will
show "
3. Place the object you want to weigh inside
the container and the scale will calculate
the weight of the object without the weight
of the container.
TARE
".
EN
to
9