Disassembly; Disposal; Returns; Information - Gemü 612 Montageanleitung

14

Disassembly

Disassembly is performed observing
the same precautionary measures as for
installation.
Disassemble the diaphragm valve
G
(see chapter 11.1 "Valve disassembly
(removing bonnet from body)").
15

Disposal

All valve parts must be
G
disposed of according to
relevant local or national
disposal regulations /
environmental protection
laws.
Pay attention to adhered
G
residual material and gas
diff usion from penetrated
media.
16

Returns

Clean the valve.
G
Request a goods return declaration form
G
from GEMÜ.
Returns must be made with a completed
G
declaration of return.
If not completed, GEMÜ cannot process
credits or

repair work

but will dispose of the goods at the
operator's expense.
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods can
be processed only when this
declaration is completed.
17

Information

Note on Directive 2014/34/EU
(ATEX Directive):
A supplement to Directive
2014/34/EU is included with the
product if it was ordered according
to ATEX.
Note on staff training:
Please contact us at the address
on the last page for staff training
information.
Should there be any doubts or
misunderstandings in the preceding text,
the German version of this document is the
authoritative document!
29 / 32
612