Set Maximum Output Voltage; Set Maximum Output Current; Set The Maximum Operating Time; Save Settings And Exiting Menu - Fronius Selectiva Plus E Bedienungsanleitung

Set maximum
output voltage
1.
2.
3.
Set maximum 1.
output current 2.
3.
Set the maximum
The device provides current until the set operating time has been reached.
operating time
Important! If you briefly interrupt operation (by pressing the Start/Stop button), the
operating time will restart at zero.
1.
2.
3.
Important! Once the operating time is zero, the display changes to „Timeout off".
In this mode the Autostop function is deactivated. The Device can only be stopped by
pressing the Start/Stop button.
Save settings
Save settings
and exiting menu
c
c c
c
c
Exiting menu
c
c c
c
c
CAUTION! Risk of damage while power being supplied. Before starting the
power supply, ensure that the system to be supplied and any available buffer
battery are fully functional.
Select menu item „U-Supply" by pressing the Info button
Set voltage in 1 V steps by pressing the up or down arrow together
+
with the start/stop button
+
Set voltage in 0,1 V steps by pressing the up or down arrow
/
Select menu item „I-Supply" by pressing the Info button
Set current in 5 A steps by pressing the up or down arrow together with
+
the start/stop button
+
Set current in steps of 0.5 V using the up or down arrow
/
Select menu item „Time out" by pressing the Info button
Set in hour steps by pressing the up or down arrow together with the
+
start/stop button
+
Set in minute steps using the up/down arrows
/
Max. operating hours limit switched off
c c c c
c c
c c c c
If „yes" is selected, the settings will be saved and the device will return
to „supply stop".
c
c c
c
c
Selecting „no" will call up the next menu item
To exit Service Level 2 setting, select „yes"
c
c c
c
c
Selecting „no" calls up the start page of Service Level 2.
9