Safety Regulations; Proper Use; Layout And Items Supplied - EINHELL 11022 Originalbetriebsanleitung

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
•
Be sure to wear safety gloves and all other
essential safety equipment when working
on the sawing trestle! It is also imperative to
follow the safety instructions issued with the
chain saws!
•
Take care that you do not injure yourself on
sharp corners or edges.
•
Place the sawing trestle on a level, non-slip
surface.
•
Do not overload the chain sawing trestle
(max. 150 kg, Ø 250-300 mm).
•
The wood you want to saw must always rest
securely on the chain sawing trestle.
•
The wood you want to saw is allowed to pro-
ject beyond the chain sawing trestle only to
the point where tipping is impossible.
•
Each time before use, check that all screws
are securely and correctly fastened.

2. Layout and items supplied

2.1 Layout (Fig. 1-3)
A. 2 x foot A
B. 2 x foot B
C. 2 x foot C
D. 2 x cross strut D
E. 2 x cross strut E
F. 3 x M8x14 screw + 3 x M8 self-locking nut
G. 2 x M6x28 screw + 2 x M6 nut
Anl_Kettensaegebock_SPK9.indb 8 Anl_Kettensaegebock_SPK9.indb 8
GB
H. 8 x M6x12 screw + 8 x M6 nut
I. 3 x M6x12 screw + 3 x M6 washer
+ 3x M6 nut
J. Safety catch
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Chain Sawing Trestle
•
Original operating instructions

3. Proper use

See the illustrations. The nuts G and H must be
tightly secured. The self-locking screws F and I
must be secured to the point where the chain sa-
wing trestle can still be adjusted/folded.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
- 8 -
23.06.2017 11:29:16 23.06.2017 11:29:16