Using The Product As Intended; Safety Notes; Contents; Technical Data For The Turnout Decoder - Märklin 24802 Bedienungsanleitung

Using the Product as Intended

The track and turnouts can be used in Märklin's H0 C Track
system.

Safety Notes

Make sure you read the following safety notes before using
this Märklin product for the first time.
• IMPORTANT! Sharp edges and points required for operation.
Danger of choking due to detachable small parts that may be
swallowed.
• This product may only be used indoors.
• Do not store this product in direct sunlight or areas with
extreme swings in temperature or high humidity.
Important Notes
• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Please see your authorized Märklin dealer for repairs or
spare parts.

Contents

1 x 24611 Tournout left digitally controlled
1 x 24612 Tournout right digitally controlled
5 x 24172 Straight Track
3 x 24188 Straight Track
2 x 24224 Curved Track
1 x Operating instruction

Technical Data for the Turnout Decoder

The built-in turnout decoder is the same in function as
Märklin item number 74461.
• Load at lantern output
• Load at turnout output
• Voltage for the digital power circuit max. 20 volts eff.
• External voltage
• Electrical strength

Setup and Connections

Unplug the switched mode power pack from the household
current in order to prevent damage during setup. Do not plug
the switched mode power pack in the wall outlet again until
you are finished with all of the work.
Putting track together
≤ 100 milliamps
max. 2 amps
max. 20 volts DC
max. 40 volts
7