Playback - Abus TVIP11502 Bedienungsanleitung

Wide Dynamic Range
Mode:
Level:
Noise reduction
Mode:
Schedule:
Accept the settings by pressing "SAVE" or cancel them by pressing "Cancel".

6.3 Playback

Client PC
Open video file
This button starts the file selection dialog for opening a video file. Playback is then started automatically.
Pause
Pauses the playback of the video file.
Stop
Stops the playback of the video file.
Rewind
Rewinds the video.
Fast-forward
Fast-forwards the video.
Progress bar
Progress bar for playback. Click the bar to jump to a specific point in the video.
Digital zoom
The digital zoom can be activated here. The zoom area can be changed in the video image. The zoom factor
can be changed using the "W" (wide angle) and "T" (tele-zoom) buttons.
Network storage
The file manager for data saved on the network is located here (network storage function).
The following buttons have the following functions. Some functions cannot be used until after a file is selected
in the "File Name" column; until this happens the button is gray.
Off: The WDR function is deactivated
Auto: The WDR function is activated.
The dynamic range of the WDR function can be set in 10 levels. The function is
automatically controlled up to the maximum set value.
Off: The noise reduction function is deactivated.
On: The noise reduction function is continuously activated.
Schedule:
Night mode: The noise reduction function is active when night mode is active.
If the mode is controlled using a schedule, an appropriately configured
schedule must be selected here.
82