Herunterladen Inhalt Inhalt Diese Seite drucken

Hps-100: Ptp / Synce / Hardware Ntp Interface - Meinberg IMS-M3000 Handbuch

Vorschau ausblenden Andere Handbücher für IMS-M3000:
Inhaltsverzeichnis

Werbung

12.6.14 HPS-100: PTP / SyncE / Hardware NTP Interface

IEEE 1588 v2 kompatibel
Profile:
PTP Modi:
NTP Modus:
1588 Clock Modus:
Synchronous Ethernet:
Netzwerkprotokolle:
Netzwerkschnittstelle:
USB Schnittstelle:
Signalausgänge
CPU:
Genauigkeit:
58
IEEE 1588v2 Default Profile
IEEE 1588v1 (option)
Enterprise Profile
IEC 61850-9-3 Power Profile
IEEE C.37.238-2011 Power Profile
IEEE C.37.238-2017 Power Profile
ITU-T G.8265.1 Telecom Frequency Profile
ITU-T G.8275.1 Telecom Phase / Time Profile (full timing support)
ITU-T G.8275.2 Telecom Phase / Time Profile (partial timing support)
SMPTE ST 2059-2 Broadcast Profile
IEEE 802.1AS TSN/AVB Profile
AES67 Media Profile
DOCSIS 3.1
Multicast/Unicast Layer 2 (IEEE 802.3)
Multicast/Unicast Layer 3 (UDP IPv4/IPv6)
Hybrid Mode
E2E / P2P Delay Mechanismus
Bis 128 Nachrichten/Sekunde pro Client
NTP Server-Modus (8 ns Zeitstempel-Genauigkeit)
1-Step, 2-Step in Master- und Slave - Betrieb
Master und Slave - Unterstützung
Kompatibel zu ITU-T G.8261, G.8262 und G.8264
Ethernet Synchronisation Messaging Channel (ESMC)
IPv4, IPv6
DHCP, DHCPv6
DSCP
IEEE 802.1q VLAN filtering/tagging
IEEE 802.1p QOS
Combo Port: 1 x 100/1000BASE-T RJ45, 1 x GBIT SFP - Slot
USB 1.1 / USB 2.0 full-speed, Micro USB Buchse
2x SMA (50 Ohm) Anschlüsse
Konfigurierbare Signale: 1PPS, 10MHz, 2048kHz
825 MHz Cortex A9 Dual Core on SOC
8 ns
Datum: 22. Oktober 2018
IMS-M3000

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis