Wet Vacuuming; Emptying The Container - Kärcher NT 702 eco Bedienungsanleitung

NT 702 eco / NT 702 I

Wet vacuuming

Emptying the container

Stopping
Accessories
We offer complete sets for industry,
skilled trades, the construction
industry, warehouse cleaning and
much more. Further information can
be found in our catalogue or obtained
from our sales offices in your area.
10
• The paper filter sack or the cloth filter bag must be removed for wet
vacuuming.
• The surface filter remains installed in the unit.
• If the tank is full, the electronic overflow sensor switches off the
unit. If this occurs, switch off the unit and empty the tank.
Important: The electrodes and the plastic casing near the
electrodes must be cleaned occasionally and then rubbed dry
(see troubleshooting).
• Switch off the cleaner (Position 0)
• Release the latches on both sides of the
container by pulling them upwards.
• Lift off the vacuum section by its handle,
and lay it on its side.
• The container can either be removed com-
pletely or tilted to the rear for emptying
(see diagram).
• Switch off vacuum (position 0).
Important: Empty and clean vacuum after each use.
Accessories can be stored on a tray at the rear of the cleaner.
Suction tubes can be stored in special holders.
Standard (supplied with cleaner) *
Suction hose NW 40, 4 m ......................................................... 4.440-263
Elbow section NW 40 ................................................................ 6.900-276
Suction tubes 2 x 0.5 m ............................................................ 6.900-275
Floor nozzle ..............................................................................................
* not with 1.036-131 and 1.036-601
Special accessories
Surface filter ............................................................................. 5.731-020
Paper filter sack ........................................................................ 6.904-123
Cloth filter bag ........................................................................... 6.904-014
Exhaust air filter ........................................................................ 6.414-446
Crevice nozzle .......................................................................... 6.903-033
English