Basic Operation - Sharp HT-SB106 Bedienungsanleitung

8
LINE IN
A. Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio
output sockets to the LINE IN socket
on the unit.
B. Use a 3.5mm to 3.5mm audio cable
(not included) to connect the TV's
or external audio device headphone
socket to the LINE IN socket on the
unit.
TIP:
When you use the headphone output on
the TV set, you will be able to adjust the
volume level directly using the TV remote
control.
EU
HDMI - ARC/CEC
UK
Connect to Power
• Before connecting the power adapter,
ensure you have completed all other
connections.
• Risk of product damage! Only use the
supplied mains adaptor as failure to do
HDMI - ARC/CEC USB LINE IN OPTICAL
DC IN
USB LINE IN OPTICAL DC IN
this may result in a safety risk and/or
damage to the unit.
• Connect the power adapter to the DC
IN socket of the unit and then into a
mains socket.
DC IN

Basic Operation

Standby/ON
• When you fi rst connect the unit to the
main socket, the unit will be in STAND-
BY mode.
• Press the
rol to switch the main unit ON or OFF.
• Disconnect the main plug from the
main socket if you want to switch the
unit off completely.
– When the unit has no input signal for
over 15 minutes, it will automatically
switch to Standby mode.
Select Modes
Press the
repeatedly or press the LINE/USB, BT
(Bluetooth), OPT/ARC buttons on the
remote control to select the desired
mode.
Adjust the Volume
– Press the + / - buttons on the unit or
on the remote control to adjust the
volume.
– If you wish to turn the sound off ,
press the MUTE button on the remote
control. Press the MUTE button again or
press the +/- buttons on the unit or on
the remote control to resume normal
listening.
Select Equaliser (EQ) Eff ect
• While playing, press the EQ button on
the remote control to select between
preset equalisers: Movie (recommen-
ded for viewing movies), Music (recom-
mended for listening to music), News
(recommended for listening to News).
button on the remote cont-
button on the unit