Front Panel; Rear Panel - ION Offroad Schnellstartanleitung

Features

Front Panel

1. Power Button: Press this button to
power Offroad on and off.
2. Radio Selector: This button sets the
radio to FM, AM, or turns the radio off.
3. Tune/Track Buttons: Tap these buttons
to tune in a radio station or go to the
previous/next track on a Bluetooth-
connected device. To "seek" (jump to
the next available station), hold either
button down for a few seconds until it
starts to seek a station. The unit will
remember the last station it was on and
start at that station when powered off
and on again.
4. Play/Pause/Preset: Press to play or pause a track from a connected Bluetooth device.
In Radio Mode, press and release this button to select a previously saved preset station. See the
section Using the Radio
5. Bluetooth: Press this button to disconnect a paired Bluetooth device.
6. Display: Displays the current radio station, battery status, and Bluetooth status.
• Charging Indicator: When the power cable is connected, movement of the top battery
segment shows the battery is charging. When fully charged, all battery segments will be lit
without blinking. When the power cable is disconnected, the battery segment shows the
level of the battery.
• Lightning Bolt Icon: The lightning bolt icon will illuminate when the IEC power cable is
connected to wall power.
• Bluetooth Icon: The Bluetooth icon will not be lit when Offroad is first powered on (unless it
was previously paired with a device). The Bluetooth icon will be lit solid when a device is
paired to Offroad.
• Power Indicator: The power indicator (radio display decimal point) will be lit when Offroad is
powered on. The power indicator will not be lit when Offroad is powered off.
7. Auxiliary Input: This stereo 1/8" (3.5 mm) input can be used to connect a smartphone, MP3
player, or other audio source.
8. Microphone Input with Volume Control (1/4"): This mono input accepts 1/4" (6.35 mm) inputs
such as a microphone, guitar, or other musical instrument.
9. Master Volume Control: This adjusts the speaker's main mix volume, which includes the
Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
10. USB Charging Port: Connect your device's charge cable here to charge it. USB charging only
functions when the unit's power is turned on.
Note: To charge smartphones and tablets faster, put the device's screen to sleep.
11. NFC (near-field communication): Touch and briefly hold your supported and enabled device to
the NFC logo to pair the device.

Rear Panel

1. Power Cable Input (IEC): Insert the included power cable here to
power the unit.
2. Fuse: If the unit's fuse is broken, lift this tab to replace the fuse.
Replace it with a fuse with an appropriate rating. Using a fuse with
an incorrect rating can damage the unit and/or fuse.
for more details on saving and recalling presets.
7 8
1 2
8
11
10
6
4
5
3
1
2
9
5