Herunterladen Inhalt Inhalt Diese Seite drucken

Front Panel - ION JOB ROCKER Schnellstartanleitung

Vorschau ausblenden Andere Handbücher für JOB ROCKER:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
Quick Setup / Connection Diagram
1.
Make sure all items listed in the Box Contents at the beginning of this guide are included in the box.
2.
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3.
MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE BATTERY PRIOR TO FIRST USE
FOR MAXIMUM BATTERY LIFE.
4.
Turn down the volume on the Job Rocker.
5.
Connect your music player with an audio cable or Bluetooth (see Connecting with a Bluetooth Device
for more details on this).
6.
Adjust the volume on the music player and on Job Rocker as needed.
7.
Turn off Job Rocker when not in use.
Included Audio Cable
with 1/8" (3.5mm)
connectors
MP3
Player
(not included)
Features

Front Panel

1.
Master Volume Knob: Controls the overall
volume for the Bluetooth® source, the AUX
input, and the radio.
"
2.
1/8
Aux input: This stereo 1/8" input can be
used to connect a smartphone, MP3 player, or
other audio source.
3.
Bluetooth: The Paired LED will be lit when a
device is connected to Job Rocker. This LED
will not be lit when Job Rocker is first powered
on (unless it was previously connected with a
device). Press the Bluetooth Disconnect
button to disconnect a connected Bluetooth
device.
4.
Tuner: Use these buttons to search for a radio
station. To "seek" (jump to the next available station), hold this down for a few seconds until it starts to
seek a station. The unit will remember the last station you were on and start at that station when you
power off and power on again.
5.
Radio Preset Buttons: There are 6 storage locations for FM stations, and 6 storage locations for AM
stations. When you move the am/fm/off switch to AM or FM, that action changes the bank of presets
you are on.
6.
LCD: Displays the current radio station.
7.
Radio Selector: This switch sets the tuner to AM or FM or turns the tuner off.
(Note: This switch does not turn the unit's power off – just the tuner.)
8.
Power LED: Indicates whether Job Rocker is powered on or off.
9.
Antenna: Adjust this FM antenna to get the best radio reception. To improve AM reception, move the
entire unit.
Note: To prevent accidental damage, we recommend rotating the antenna only when it is extended
horizontally. Lay the antenna down in its holder when the Tuner is not in use.
Front Panel
Tablet (not included)
Rear Panel
The AC outlets work when
wall power is connected.
2
1
4
Drill (not included)
Power
Work Light
(not included)
9
5
6
3
7 8
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis