Playback From An External Audio Device; Charging A Usb Device Via The Usb Port; Software Updates; Troubleshooting - Medion LIFE P61071 Bedienungsanleitung

13. Playback from an external audio device

 Connect a 3.5 mm stereo jack cable to the LINE IN socket to play back stereo
sound output from other audio devices via the Wi-Fi speaker.
 Press the MODE button to switch to LINE-IN mode. The operating LED lights
up orange as soon as the Wi-Fi speaker is in LINE IN mode.
 To switch back to a previously set up Wi-Fi mode (network or direct mode), press
the MODE button again. As soon as the Wi-Fi speaker is in WI-FI mode, the
operating LED lights up white.

14. Charging a USB device via the USB port

You can charge the battery of a device that is charged via a USB port on the USB
port of the Wi-Fi speaker.
 Connect the device that you want to charge via a USB cable to the USB port on
the rear of the Wi-Fi speaker.
NOTICE
The USB port on the Wi-Fi speaker delivers a charging current of 5 V at
an output voltage of max. 1 A. Do not connect any devices that require a
higher power consumption to charge on your Wi-Fi speaker.
The Wi-Fi speaker must be switched on or in standby mode to charge.

15. Software updates

• You can update the software of the Wi-Fi speaker via the app. The app will scan
whether there are any software updates available and download these via the
Internet onto your Wi-Fi speaker.

16. Troubleshooting

If the device malfunctions, please check first if you can eliminate the error yourself
with the help of the following overview.
Never try to repair the device yourself. Contact our Service Centre or other qualified
personnel if a repair is necessary.
Problem
No sound
Possible cause
Wrong playback mode set Select LINE IN mode or
Volume level too low
No reception
Solution
network mode.
Check the volume level.
Check the network set-
tings.
DE
EN
FR
NL
33