Object Classification - dallmeier DVS 600 Bedienungsanleitung

4

Object Classification

To take account of the increased outdoors requirements and obtain
qualified alarm messages, you can use the object type as another
criterion for the object filter.
The object-classification is configured with the sensor via SenViCon.
Therefore some requirements have to be take into account on the
recorder side:
1. The SK6 object classification must be enabled (only possible
for DVS 600, not for retrofit kit).
2. SEDOR must be activated for the relevant camera (dialog
Camera Settings).
3. The sensor recording must take place on the Detection track.
4. The compression on the Detection track must be set to the top
quality level (default: Highest quality).
5. The recording interval for the pre-alarm pictures should be set
to 0.500 (2 pic./sec).
Dallmeier electronic GmbH & Co.KG
IMPORTANT
The function object-classification can only be
used with DVS recorders that have max. 12
cameras inputs enabled.
45