Application Packages; Data Output - Mettler Toledo PE360 DeltaRange Bedienungsanleitung

FURTHER CAPABILITIES OF PE BALANCES: Application Packages, Data Output
A Data Output is available for the PE balances. This can be installed by the user very easily. For special applications, there are accessories available for PE balances;
a selection of these is presented on the following two pages.
Your routine weigings can be greatly simplified by using METTLER TOLEDO Application Packages which are programmed for a range of particular weighing
operations.
They contain a GE305 Application Input Device or a GE310 Terminal and a Data Output board.
Data Output
The following peripheral instruments can be connect-
ed to the data output socket (2):
– GA24 Calculating printer
– GA44 Thermoprinter
– METTLER TOLEDO CL instruments
– Non-METTLER TOLEDO instruments with CL or
RS232C data interfacing.
To the socket (3) can be connected:
– GE305 Application Input Device
– GE310 Terminal
– GE48 Auxiliary Display.
The Data Output alone (without Application Package)
can be delivered with the balance or ordered at a
later date, see "ACCESSORIES".
Application Packages
a) with the GE305
Application Input Device:
– LabPac which offers interesting
application functions for
laboratories.
– ProPac which offers important
application functions for
production.
– GemPac I/II for weighing precious
metals or stones.
b) with a GE310 Terminal:
– StatPac for statistical quality control
(SQC11).
– CountPac for piece counting with the
possibility of entering the
reference weight, a pretare
value etc.
– DataPac for designing any desired
application for use with a
computer. The GE54 Output
Module is available as an
option; this instrument
makes control of a variety of
additional functions
possible.
13