Star SP200F SERIES Bedienungsanleitung Seite 16

Upper
paper
Print head
Fig. 4-16 Insertion of the paper into the auto cutter
Paper
outlet
Fig. 4-17 Paper outlet of the front
cover
Paper insertion
slit
Platen
Lower paper
(When using copying paper)
9 Pull on the edge of the paper to
0 Insert the paper through the paper
Auto cutter
– 13 –
Paper insertion
slit
Print head
remove any slack and then lower the
auto cutter.
outlet and then replace the cover by
reversing the removal steps.
Note: When the paper end mark ap-
pears on the paper, replace the
roll paper before it runs out.
FEED switch
Fig. 4-18
Auto cutter
Upper paper
Lower paper
Platen