Phonocar VM 032 Gebrauchsanweisungen Seite 35

General Operation GB
GENERAL NOTES FOR BLUETOOTH
1. For N7X, N9X, PHILIPS, Sony Ericssion, SAMSUNG mobile phones, during our test, after the mobile
phones appear connection successful, the unit still appear waiting for pairing. At this time you must find the
unit's Bluetooth module name "PHONOCAR" on the pairing list on your mobile phone and select connecting
in the submenu, then the unit will appear pair OK. Otherwise, there is no voice coming out when commu-
nicating, though the mobile phone has already displayed pair OK. Some mobile phones, such as PHILIPS,
when it playbacks A2DP, you must find the unit "PHONOCAR" in the phone's menu and reconnect (check
your mobile phone whether has the A2DP & AVRCP functions).
2. When pairing, some types of mobile phone hint that how to operate, for example, when you make a
phone call by the unit, if the mobile phone voice dosn't be transferred to the unit, no voice comes out. The
SAMSUNG mobile phone hints that voice should be transferred to Bluetooth device.
3. Depending on the mobile phone, if private mode is selected, when you make a phone call by the unit, or
receive, the voice would be transferred to the mobile phone. But sometime the Bluetooth maybe disconnect
till the communication ends, then connects your mobile phone to the unit automtically.
Some mobile phones maybe need pair again.
4. For mobile phone, the Bluetooth device name must be pr imary symbols or numbers. Otherwise, some
unpredictable issues may occur during the Bluetooth devices connecting and making phone call.
5. After paired OK, if no sound produced, please check whether the Bluetooth stereo audio on the phone
switched ON.
ATTENTION: our Bluetooth communication-protocol is based on the 2.0 Software. Before purchasing this
Product, please make sure that this Software is compatible with your mobile-phone.
35