To Pair Dog 1 Receiver Collar And The Handheld Remote - Petsafe SPT-275 Gebrauchsanweisung

Dog 1/Dog 2 Stimulation Levels
To change the Stimulation Level for Dog 1 or Dog 2, press and hold the +2 Boost Button for 5
seconds. The Dog 1 icon along with it's selected Stimulation Level will appear. You can now use the
Upper Right Button to increase the Stimulation Level for Dog 1 and the Lower Left Button to decrease
the Stimulation Level. Press the +2 Boost Button to lock the Stimulation Level. Now you can adjust the
Dog 2 Stimulation Level using the same method. Press the +2 Boost Button to lock the Stimulation Level
and return to normal 2-Dog operation.
Note: To view the currently selected Stimulation Level for Dog 1, press the +2 Boost Button once
and the display will show the Dog 1 symbol along with the selected Stimulation Level.
To view the currently selected Stimulation Level for Dog 2, press the +2 Boost Button twice and
the display will show the Dog 2 symbol along with the selected Stimulation Level.
To Remove Dog 2 from the Handheld Remote
Press and hold the +2 Boost Button for 5 seconds. Press the Right Lower Button until the
"1d" symbol appears on the Digital Display. Press +2 Boost Button to exit the menu.
STEP 5
To Pair Dog 1 Receiver Collar and the
Handheld Remote
If your Receiver Collar does not beep when the Upper Left Button of the Handheld Remote is
pressed, or if the Receiver Collar is not responding to the Handheld Remote, follow these steps:
1. With the Receiver Collar off your pet, turn the Receiver
Collar off.
2. Press and hold the On/Off Button for 5 seconds.
3. The Receiver Collar will beep and the LED will flash.
4. Press the Tone Button .
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not respond, please contact
the Customer Care Centre.
Note: Pairing is for Dog 1 only.
16 www.petsafe.net
Digital Display
Tone
Spray
Charging Jack
(with cover)
Spray
Up
Spray
Down
+2 Boost