Technical Data - Trotec T60 Bedienungsanleitung

Changing locations
Especially when moving from a cold to a warm environment, for exam-
ple, when taking the instrument into a heated room after it has been
stored overnight in a car, condensation may form on the circuit board,
depending on the humidity of the room.
This physical effect, which cannot be prevented in the design of any
instrument, leads to false measured data. In such circumstances, there-
fore, the display shows no measured data. Please wait for about 5
minutes in such cases until the instrument has "acclimatised" before
continuing with the measurement procedure.

6. Technical data

Principle of measurement . . . . . . . . . . . . . . . . . . . . . . . . resistance method
Electrode length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . approx. 8 mm
Electrode diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . approx. 2.2 mm
Measurement range for wood moisture . . . . . . . . . . . . . . . . . . . . . . 6 - 44 %
Accuracy of wood moisture readings . . . . . . . . . . . . . . . . . . . . approx. ±1 %
Measurement range for building moisture . . . . . . . . . . . . . . . . . . 0.2 - 2.0 %
Accuracy of building moisture readings . . . . . . . . . . . . . . . . approx. ±0.05 %
Permissible ambient conditions . . . . . . 0 - 40 °C / 0 - 85 % relative humidity
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x Cr 2032
Dimensions / weight . . . . . . . . . . . . . . . . . . . . . . . 130 x 40 x 25 mm / 100 g
Operating manual – English B - 11