Important Safety Information; Intended Use - Flex RS 29 18.0 Originalbetriebsanleitung

Akku-Säbelsäge RS 28-18.0.book Seite 14 Freitag, 3. Juli 2015 2:41 14

Important safety information

WARNING!
Read all safety instructions and general
instructions. Failure to comply with the
safety instructions and general instructions
may result in electric shock, fire and/or
serious injuries . Save all warnings and
instructions for future reference.
Before using the power tool, please read
and follow:
these operating instructions,
–
the "General safety instructions" on
–
the handling of power tools in
the enclosed booklet ( leaflet no.:
315.915),
the currently valid site rules and the
–
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
for its intended use,
–
in perfect working order.
–
Faults which compromise safety must be
repaired immediately.

Intended use

The cordless sabre saw is intended
– for commercial use in industry and trade,
– for sawing metal, plastic and wood,
– for sawing tiles and ceramics,
– for straight and curved cuts,
– for cutting pipes,
– to be used with suitable tools
recommended by the manufacturer for
this power tool.
14
Safety instructions for sabre saws
 Hold the power tool by the insulated
gripping surfaces when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord. The cutting accessory contacting
a "live" wire may make exposed metal
parts of the power tool "live" and shock the
operator.
 Keep hands away from the sawing area.
Do not grip under the workpiece. Risk of
injury if contact is made with the saw blade!
 Guide the power tool only when it is
switched on against the workpiece.
Otherwise there is the risk of kickback if the
cutting accessory snags in the workpiece.
 Make sure the cutting support always
rests on the workpiece when sawing. The
saw blade may snag, causing the operator
to lose control of the power tool.
 After completing the cutting operation,
switch off the power tool and withdraw
the saw blade from the cut only after the
blade has come to a complete stop. In
this way, you will avoid any kickback and
you can now safely put the power tool
down.
 Use only undamaged saw blades that
are in perfect condition. Bent or blunt saw
blades may break or cause a kickback.
 After switching off, do not attempt to
brake the saw blade by applying lateral
counterpressure. The saw blade may
incur damage, break or cause a kickback.
 Clamp the material so that it is firmly
secured. Do not support the workpiece
with your hand or foot. Do not touch any
objects or the ground with the saw while it
is running. Risk of kickback!
 Use suitable detectors to detect
concealed power supply cables or
consult your local supply company.
Contact with electric cables may result in
a fire and/or electric shock. A damaged
gas pipe may cause an explosion. Cutting
into a water pipe will cause damage to
property or may cause an electric shock.
RS 29 18.0