Contrast Menu - Sony ExwaveHAD DXC-C33 Gebrauchsanweisung

3 Move the cross cursor appearing at the
right bottom corner with the B, b, V or
v button to set the lower and right side
size, then press the ENTER button.
Move Window
Move Cross Cursor
Cancel
MENU ENTER
4 Move the AE window to the desired
position with the B, b, V or v button,
then press the ENTER button.
Note
To cancel the setting before completing the
procedure, press the MENU button.
AE SPEED
Appears when you set AE AREA1 or 2 to an
option other than MULTI.
Sets auto exposure focusing speed in AGC
or CCD IRIS mode. Selects from MID
(normal speed), FAST (fast speed) and
SLOW (slow speed).
Note
If lens hunting occurs, adjust with AE
SPEED.
AE DETECT
Appears when you set AE AREA1 or 2 to an
option other than MULTI.
Selects the detection method of the
luminance level of the selected AE window.
AVERAGE: Selects to detect the average
luminance level of the whole AE window.
PEAK: Selects to detect the part with the
highest luminance level.
16
GB

CONTRAST Menu

Fix Back
BARS
CONTRAST Menu
The CONTRAST menu is used to adjust the
contrast of the image.
<CONTRAST>
>EFFECT
KNEE POINT
BLACK STRETCH
GAMMA
LEVEL
MASTER PEDESTAL
R. PEDESTAL
B. PEDESTAL
Select
MENU
EFFECT
Selects the setting suitable for the incident
luminance levels.
MANUAL
Selects KNEE POINT setting or BLACK
STRETCH.
KNEE POINT
Sets the knee point according to the
incoming light levels.
OFF: Knee processing does not function.
HIGH: Sets the knee point to the highest
level.
MID: Normally, select this position.
LOW: Sets the knee point to the lowest
level.
BLACK STRETCH
Adjusts the luminance of the dark portion of
the screen.
You can set the value within the range from
–10 to +10. The higher the setting, the
brighter the screen.
DCC+ (Dynamic Contrast Control +)
When shooting a very bright object, the
whole screen may white out or a part of the
image may be colorless. This setting
minimizes these phenomena.
[A]
MANUAL
MID
+ _
0
ON
+ _
0
+ _
0
+ _
0
+ _
0
Back